2021 High quality Pdr Vehicle - Paintless Dent Removal Tools T Bar Slide Hammer – Just Better

Step1: The first position in the vehicle collision / dent. Clean the surface of the process. Use only mild cleaning agents.The use of surface coarse sponge, will cause irreparable damage.

Step2: Use the glue gun, push the glue stick into the back of the glue gun . Heating the glue gun and the glue stick melt.

Step3:Use hot glue gun, put glue on the glue tab, and then place the recess in the dent glue tab. 

Step4:Use the T bar slide hammer.When the temperature reaches the right time, do not be too hard. Then pull until the glue tab is removed. 

Step5:Use the release agent , dissolve glue. Use of the scraper, remove the glue. 

Step6:Finally, use a soft clean cloth wipe again residual glue, make the body to restore new look. 

Note:

This item can only repair the relatively small dent, if the vehicle dent is larger or is off paint, you can not use this tool to complete repair, recommended to professional repair shop.

1pc slide hammer