9pcs Stud Removal & Intaller Set
* Designed for the safe removal of locking wheel nuts, bolts, and studs.
* Suitable for hand and power tools.
* Can be used with 3/8" breaker bar/ratchet.
* Complete with handy carrying case for quick and easy storage.
* Remove the nut is ten sets of different sizes suitable for damaged, rusted nut bolt, this is taken as *unscrew screws,
* Nuts and the most important proceed stabilization tool.
* Nut & Bolt Socket Tool Set
* For the removal & installation of studs without damage to the stud threads
* Each size uses one tool for removal and one for installation
* Uniquely designed tool for the removal and installation of studs without damaging the threads.
* Each thread size uses one tool for removal and one for installation.
Remove:
1. Screw the remover onto cylinder stud as possible reach the top of remover.
2. Operate 2 wrenches (fit both sizes) and lock both parts together.
3. Keep the wrench and screw it until cylinder stud is removed.
Install:
1.Screw the new stud into installer until reaching steel ball.
2.Screw the stud into the cylinder hole.
3.Loosen the small screw on the top of installer when the work is done, and then you could loose the installer easily.
Stud Sizes:
| M6X 1.0MM | M8X 1.25MM |
| M10X 1.25MM | M10X 1.5MM |
