Paintless Dent Removal Tools Dent Tool Kit For Car Dent Repairing

Item No.:BT212043

Paintless Dent Removal Tools Dent Tool Kit For Car Dent Repairing Include:

1pc Blue glue gun
1pc Adjustable dent lifter
1pc slide hammer
1pc LED dent line board
1pc 25mm hammer
1pc tab down hammer
47pcs glue tabs
6pcs aluminum tabs
1pc scraper
10pc yellow glue stick
1set tap down set with 9pc tips
1pc bottle(60ml)
1 set dent puller set
4pcs knock down tools
1pc mini t bar
1pc cloth
1pc tool bag
1pc instructions

Send email to us

Product Detail

Product Tags

Paintless Dent Removal Tools Dent Tool Kit For Car Dent Repairing Include

1pc Blue glue gun
1pc Adjustable dent lifter
1pc slide hammer
1pc LED dent line board
1pc 25mm hammer
1pc tab down hammer
47pcs glue tabs
6pcs aluminum tabs
1pc scraper

10pc yellow glue stick
1set tap down set with 9pc tips
1pc bottle(60ml)
1 set dent puller set
4pcs knock down tools
1pc mini t bar
1pc cloth
1pc tool bag
1pc instructions

Paintless Dent Removal Tools Dent Tool Kit For Car Dent Repairing Packing

1.Neutral inner box + Ourter Carton.

2.According to your request

Application:Car Body Dent Repair
Function:Repair Car Dent Body
Used for:Repairing Car Body Dents

Advantages:

1.The operation is very simple, basically everyone can operate. Saving time, effort and money is the key.

2.No damage to the paint and body.

Product Show

OPERATION AND USE OF ARTICLE

1. Choice of the dent removal suction cup and positioning of the glue on it:

- The choice of the shape and diameter of the dent removal suction cup is made depending on the shape of the impact.

- The glue must be positioned well in the centre of the dent removal suction cup, and the unit in the centre of the impact to be straightened (Figs. 1& 2).

For edge impacts, use the elongated oval body suction cup (provided for this purpose), and position the glue in the centre of it, as shown in fig. 3, then glue the body suction cup as shown in fig.4

3.Allow the glue to dry for a few minutes (wait until the dent repair suction cup cools), then insert the dent pull lever (Fig. 5) or T-bar dent puller (Fig. 9) on the upper part of the dent removal suction cup and apply gentle pulses.

4. If the dent pull lever is used to straighten the sheet metal, it is important to adjust the stroke of the dent removal suction cup using the adjustment knob 1 located on top of the dent puller (Fig. 6). It is recommended not to stay in the same place and to turn around the impact with successive gentle pressures, in order to have different support points during the operation (Fig. 7).