Products
-
BT62614 Auto Repair Tool Petrol Engine Setting-Locking Kit
-
Item No.:BT62614
- *Suitable for setting and adjusting the timing on 1.6 BMW N40,N45T petrol engines and for aligning the Vanos units on the inlet and exhaust camshafts.
- *Includes:
- Vanos Alignment Plate.
- Camshaft Setting Plate(Inlet)
- Camshaft Setting Plate(Exhaust)
- Timing Chain Tensioner Pre-load Tool
- Flywheel Locking Pin
- Camshaft Setting Plate Securing Screw.
-
-
Inner Tie Rod Remover Installer Tool
Item No.:BT1031
* Practical: the 3/8″ Inner Tie Rod Tool Turns smooth tie rods easily. Able to remove inner tie rod without removing the outer tie rod. Best tool for servicing inner tie rods to easily remove, repair & installation
-
BT4005 10lbs Dent Puller Set
Item No.:BT4005
The slide hammer is made from malleable steel with a 10lbs sliding weight
Comes with knurled grip handle for extra control
The washer is included Heat treated fully hardened
-
BT5131 6pcs Wiper Arm Puller Set
Item No.:BT5131
6Pc Windshield Wiper Arm Repair Puller Removal Tool Kit Set
* 1#-Audi Q7
* 2#-Audi A3,A4,A5,A6
* 3#-VW Lupo nd Polo
Opel Astra G,Zaphira B,Corsa C,Vectra C…
-
BT5427 Windshield Removal Tool Set
Item No.:BT5427
7pcs Windshield Removal Tool Set includes all of the specialized tools required to safely and quickly remove windshields from a wide variety of vehicles.
-
BT8601 12pcs Air Bag Removal Tool Set
Item No.:BT8601
* 12pcs Air Bag Removal Tool Set
* 5-1/4″ Dr.x87mm(L) Bit Socket:
* 2-Torx:T25(For BMW),T30(For AUDI,OPEL,RENAULT,VW)
* 2-Torx(tamperproof):T25H(For BMW),T30H(For AUDI,BMW,MERCEDES,OPEL)
* 1-Hex:5mm (For AUDI)
-
Paintless Dent Repair Tools Cross Bar Puller Kit
Item No.:BT211025
Paintless Dent Repair Tools Cross Bar Puller Kit are professional car dent repair tools .The operation is very simple, basically everyone can operate .And help you repair your car by yourself for many times, the auto body dent puller set can be used unlimited time.
-
9pcs Blind Hole Bearing Puller Set
Item No.:BT9061
Inner Internal Bearing Puller Remover
Slide Hammer Set 8-32mm 9pc Blind Hole
Package Includes:
* 9pcs internal bearing remover with slide hammer
* Storage carrying case
-
BT0113 Cooling System Vacuum Purge & Refill Kit
Item No.:BT0113
Engine Cooling System Vacuum Purge & Refill Kit Set
Vacuum Type Coolant Filling Function: Pneumatic vacuum coolant filler first sucks and forms a vacuum on the cooling system by using shop air, then draws coolant into the cooling system. Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine. Normally, it takes 5-10mins to refill the coolant, the exact time depends on the size of the tank. Easy to operate and save time.
-
BT9045 27pcs Master Cooling Radiator Pressure Tester with Vacuum Purge and Refill Kit
Item No.:BT9045
27pcs Master Cooling Radiator Pressure Tester with Vacuum Purge and Refill Kit
Multifunction: The set is a all in one comprehensive radiator tool kit, includes leak detection, temperature measurement and coolant filling functions. The hand pump tester pressurize on the reservoir/cap, and watch for pointer drop over time to confirm system leak down. Pneumatic vacuum filler first sucks and forms a vacuum on the cooling system by using shop air, then draws coolant into system. Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine.
-
7pcs A/C & Fuel Line Disconnect Tool Set
Item No.:BT9025
* 7 quick disconnect tool kits.
* Remove the quick connect line without damage.
* Simplified the disassembly and maintenance of air-conditioning, fuel and gearbox parts for Ford, Chrysler and General Motors.
* Ideal for narrow spaces.
-
Fuel & Air Conditioning Disconnection Tool Set
Item No.:BT9041
6pcs transmission oil cooler line remover
4pcs quick AC fuel line remover
7pcs fuel line remover for disconnecting 1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4“ and 7/8″ fuel line
Scissor Fuel Line Disconnect Tool 4-1/2 In.
