Products
-
Engine Timing Tools For New Jetta/Santana
Item No.:BT4101
*Set includes crankshaft locating screw,camshaft locking tool,Belt tensioner wrench,Belt pulley wrench.
*Applications:for Santana/Gran Lavida/Golf 7
-
VAG VW/Audi 1.8/2.0 Engine Timing Tool Set
Item No.:BT4108
*Simple blocking,adjusting of camshaft,crankshaft and tension pulley when working on the engine timing e.g. when replacing the timing chain.1.8L and 2.0L FSI and TFSI 16V engine with timing chain from about 2008.
*Application:
Audi A3,A4,A5,A6,Q3,Q5,TT
Seat Leon,Toledo,Altea,Altea XL,Exeo,Alhambra
Skoda Yeti,Octavia II,Octavia III,Superb
Volkswagen Golf,Beetle,Jetta,Scirocco,Eos,Passat,Passat CC,Tiguan,Sharan,Amarok
-
Engine Timing Tool Kit for Jetta,Santana,LAVIDA
Item No.:BT4109
*Engine timing tool kit for domestic cars for New Jetta,Sagitar,LAVIDA and New Santana 1.4,1.4t,1.6
-
Timing Pulley Puller(42-82mm)
Item No.:BT6433
*Designed for removing drive pulleys with face grooves.
Removers a pulley absolutely free of and risk of damage
The tool is adaptable to different pulley diameters,as the legs are adjustable
For removing pulleys with 3,6,9 slots
-
Crank Pulley Holding Vibration Damper Locking Tool VW AUDI 1.8 and 2.0 Petrol
Item No.:BT7001
*Used to hold the pulley still whilst loosening or tightening the pulley fixing bolt
*Specially designed for TFSi/TSi 1.8 & 2.0lt petrol engines found in the VAG ranges
-
Harmonic Damper Balancer Crankshaft Pulley Holder Removal Tool for Honda Acura
Item No.:BT7002
*Break loose the crank shaft pulley/harmonic balancer bolt.
*Designed to properly secure the pulley from relating during R & R of crank bolt.
*The 50mm hex head armature slips past the lightest of spaces and slides right into the center slot on the pulley.
*Then slide the long bar onto the receiving end of the armature and lock it into position with the securing bolt.
-
Audi-VW Belt Pulley Reaction Wrench
Item No.:BT7003
*Designed for locking on water-pump pulley
*Easy loosening of stubborn screws on the water-pump pulley
*1/2″ square driver in the handle to allow extension of tool
*Application:Audi 80/A4,VW Golf,Polo,Passat and etc.
-
41mm Water Pump Wrench
Item No.:BT7004
*Easily adjust and hold the water pump when replacing or adjusting the timing belt,and easy access to timing belt sprocket without interference from vehicle frame
*Works on 1.6L engines in 2004-current Chevrolet Aveo(excluding 2009 with variable timing engines) and 1999-2002 Daewoo Lanos
-
Cranks Crankshaft Pulley Removal Wrench Holder Tool For Honda And Acura Engines
Item No.:BT7011
*Designed with a 4″ Offset for holding the damper when removing and installing the crank bolt on many honda and acura engines.
*Designed with a 50mm outer hex and large center opening to fit impact sockets.
*Use 1/2″ Dr.ratchet of breaker bar to hold the damper in place.
-
Crankshaft Seal Flange Remover and Installer Tool
Item No.:BT7018
*Design for mouting of the transmission-side radial sealing ring
*Installing the sealing ring without this tool can cause leaks,destruction of the new sealing ring and bad engine running
*Suitable for VAG models with 1.4 & 1.6L 16V engines,built in e.g.following vehicles:Seat *Arosa,Ibiza,Cordoba,Leon,Toledo,Inca Skoda Facia,Octabia,Roomster VW Lupo,Polo,Golf,Bora,Beetle,Caddy
-
Crankshaft Pulley Wrench Holder Holding Removal Tool For Subaru
Item No.:BT7026
*Designed to hold the crankshaft pulley stationary while loosening or tightening the center (crankshaft) bolt
*Application Detail:
1993-present Impreza
1998-2009 Forester
1994-2009 Legacy and Outback
2005-2006 Saab 9-2X
2004-2006 Baja
2012-present BRZ and Scion FR-S
-
Engine Setting/Locking Kit-Vauxhall/Opel
Item No.:BT8073
*Covers a wide range fo Vauxhall/Opel and Chevrolet petrol engines
*Includeds the necessary tools for setting and locking the camshafts and crankshaft
*Also includes the pins for locking the timing chain tensioner
*Applications:Vauxhall/Opel,Chevrolet,Holden,Cadillac
